Air Tank Parts
AccuAir ENDO Service KitAccuAir ENDO Service Kit https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/a/c/accuair_endo_service_kit.png$21.95If you ever need to open up your AccuAir ENDO Tank to repair a faulty component, all of the hardware and o-rings must be replaced. If you don't end up replacing all of your hardware and o-rings after 'breaking the seal' you'll most likely have some pretty severe leaks.
Includes:- (16) End cap bolts
- (16) End cap bolt o-rings
- (2) End cap o-ring seals
This air tank mounting hardware kit is the perfect solution for your Air Lift air tank.
BR02554 USD 10.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/air-lift-tank-mounting-hardware-kit.html
One of the easiest ways to drain your tank! As your compressors run, they create condensation which cools and pools up inside of your air tank. The swivel elbow that is included with this kit goes on the bottom most port of your tank that is pointing down, towards the ground. Connect the 5 feet of 1/4" air line to the swivel elbow (trim if needed), and then connect the PTC inflation valve to the other end.
When you are ready to drain your tank, just pull the inflation valve and air line out of your car, depress the pin in the inflation valve and spray water and compressed air out of your tank. Once the water stops flowing you're done! The inflation valve included also doubles as a way to fill your tank in the unlikely event a compressor fails to run.
Includes:- (1) 1/4"PTC - 1/4"NPT SMC DOT Swivel Elbow
- (1) 1/4"PTC Inflation Valve
- Five (5) feet of 1/4" Air Line
A reducer bushing may be required to work with certain tanks.
BR01291 USD 20.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/air-tank-drain-kit.html
The simplest way to utilize all of the ports of your tank. Nothing fancy, it just works. Choose your tank and line size and we’ll figure out the rest!
Each fitting pack comes with the required fittings to support a pressure switch / sensor, 1 or 2 manifold supply lines, and 1 or 2 compressors. All extra ports on the tanks will be filled with supplied hex plugs.
Air Tank Fitting Pack USD 26.25 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/air-tank-fitting-pack.html
<p>AVS's Evolve Compressor Pedestal Mount is designed to put your Viair compressor on display. Made of 1/4" steel, this bracket is heavy duty and built to last. It features a stainless steel badge that can be removed or replaced.</p> <p>Small mounts work on 380C and 400C compressors. <br> Large mounts work on 444C, 450C, 480C, and 485C compressors.</p>AVS Evolve Compressor Pedestal Mount USD 60.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/avs-evolve-compressor-pedestal-mount.html
Wiring up an AVS Switch Box to your AccuAir ENDO-CVT Tank or AccuAir VX4 Manifold? Avoid wiring headaches by purchasing this plug and play harness! Plug one end into the AccuAir valve plug, connect the corresponding wires to the switch box, wire it up to power and you're done!
AVS Switch Box to AccuAir ENDO-CVT / VX4 Harness USD 75.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/avs-switch-box-to-accuair-endo-cvt-vx4-harness.html
Wiring up an AVS Switch Box to your AccuAir ENDO-VT 5 gallon or 3 gallon tank? Avoid wiring headaches by purchasing this plug and play harness! Plug one end into the AccuAir ENDO-VT tank, connect the corresponding wires to the switch box, wire it up to power and you're done!
AVS Switch Box to AccuAir ENDO-VT Harness USD 105.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/avs-switch-box-to-accuair-endo-vt-harness.html
This harness from AVS is designed to wire up an AccuAir e-Level or SwitchSpeed system to an AccuAir ENDO-VT tank. AccuAir requires you to follow a complicated wiring diagram and solder a bunch of wires together to get your ENDO-VT to work with their own e-Level and SwitchSpeed systems. This harness from AVS is the perfect, no solder solution.
The 40 inch version of this harness will plug into an e-Level or SwitchSpeed ECU that is centrally mounted on a 5 gallon ENDO-VT tank. If you're running a pair of 3 gallon ENDO-VT tanks and want to mount one on each side of the vehicle, you'll want to go with the 72 inch version of the harness instead.
AVS Valve Wiring Harness for AccuAir ENDO-VT USD 90.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/avs-valve-wiring-harness-for-accuair-endo-vt-to-e-level-switchspeed.html
<p>The Electric Air Tank Drain Kit is one of the quickest and easiest ways to drain your air tank. As your compressors run, they create condensation which cools and pools up inside of your tank. Getting rid of this condensation is mandatory to prevent water from entering your valves and the rest of the system. This kit has the same functionality as the <a href="{{store direct_url="air-tank-drain-kit.html"}}" target="_blank">Air Tank Drain Kit</a> but allows you to purge the tank with a single press of a button from inside of the car!</p> <strong>Installation Manual</strong> <ul> <li><a href="{{store direct_url=media/bagriders/tech_section/bag_riders/installation_manuals/bag_riders/management/bag_riders_electric_tank_drain_kit_installation_guide.pdf}}" target="_blank">Electric Tank Drain Kit Installation Manual</a></li> </ul>BR01753 USD 80.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/electric-air-tank-drain-kit.html
These brackets from Seamless Tanks are designed to be used with their seamless tanks. These brackets will not work with any other air tank brands.Seamless Tanks Tank Bracket Pair USD 55.56 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/air-tanks/air-tank-parts/seamless-tanks-air-tank-bracket-pair.html
SquareTank Seal Kit (Black)SquareTank Seal Kit (Black) https://www.bagriders.com/media/catalog/product/placeholder/default/imagecomingsoonfinal_4.png$20.00If you ever need to open up your SquareTank for paint or repair, all of the hardware and o-rings must be replaced. If you don't end up replacing all of your hardware and o-rings after 'breaking the factory seal' you'll most likely have some pretty severe leaks.
Includes:- (2) O-Rings
- (8) Black Hardware
- O-Ring Lube Packet
- Anti Seize Packet
- SquareTank Seal Kit (Clear)SquareTank Seal Kit (Clear) https://www.bagriders.com/media/catalog/product/placeholder/default/imagecomingsoonfinal_4.png$20.00
If you ever need to open up your SquareTank for paint or repair, all of the hardware and o-rings must be replaced. If you don't end up replacing all of your hardware and o-rings after 'breaking the factory seal' you'll most likely have some pretty severe leaks.
Includes:- (2) O-Rings
- (8) Clear Hardware
- O-Ring Lube Packet
- Anti Seize Packet
