AccuAir Management Parts

This bulkhead kit from AccuAir contains all the fittings necessary to run your 4 bag lines out the chassis of your car to the suspension.

• (4) 3/8" PTC bulkhead fittings
• (8) 3/8" PTC swivel elbows

AccuAir's e+ ECU Upgrade is for those with an existing e-Level or SwitchSpeed system that want to update to the latest and greatest. This ECU not only looks better than the previous version, but it also has built in Bluetooth which allows you to control your vehicle from your smartphone using AccuAir's ePlus app. Want to spice up your management setup? Now you can change the color of your ECU with adjustable RGB lighting.

If you don't already own SwitchSpeed or e-Level, you'll want the complete e+ Connect system which comes with the necessary wiring harness.

Features:

• Use your current e-Level or SwitchSpeed harness to power this ECU
• Control your air suspension with your smartphone using the ePlus app
• Air tank pressure readout on the ePlus app
• RGB backlighting that allows you to change the color of your ECU
• Battery saver mode that puts the system to sleep after 24 hours
• Bluetooth 5.0
• Over the air updates

Includes:

• AccuAir e+ ECU
• ePlus smartphone app
• Mounting hardware

This sensor from AccuAir is a replacement for a broken or malfunctioning e-Level sensor.

The Air Lift 3H sensor is a direct replacement. The sensor arm is a slightly different shape so you may need to adjust your linkage.

This sensor linkage and hardware pack is for the current AccuAir e-Level sensors.

The Air Lift 3H Sensor Linkage and Hardware is a direct replacement. The linkage is a slightly different length so you may need to cut it down.

AccuAir designed these replaceable e-Level sensor arms to snap under excessive load which prevents the sensor itself from being damaged. These plastic sensor arms are only compatible with the latest version of e-Level sensors (purchased after 2013).

This is the main ECU harness for AccuAir's e-Level+ and e+ Connect systems. This harness also works for older e-Level TouchPad and SwitchSpeed systems. BR01034 USD 93.95 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/replacement-air-management-parts/accuair-management-parts/accuair-ecu-main-harness.html

If you ever need to open up your AccuAir ENDO Tank to repair a faulty component, all of the hardware and o-rings must be replaced. If you don't end up replacing all of your hardware and o-rings after 'breaking the seal' you'll most likely have some pretty severe leaks.

• (16) End cap bolts
• (16) End cap bolt o-rings
• (2) End cap o-ring seals

The AccuAir Height+ Upgrade allows you to add height sensors to your existing AccuAir e+ Connect wireless controller changing it into an e-Level+ system. This upgrade will give you 3 programmable height presets so you can air up or down to the perfect height with the touch of a single button.

When using the ePlus app, your smartphone will show a visual display of each sensor's height percentage so you know what your suspension is doing at all times.

Features:

• 3 programmable heights
• Visual display of each sensor's height percentage in app
• Automatic calibration

Includes:

• (4) height sensors & linkage
• Height sensor harness

The AccuAir Pigtail Valve Harness is the same as the one included when purchasing an AccuAir system. One end has a connector for the back of any AccuAir ECU and the other end can be wired to a manifold or valves of your choice. Be sure to check out the valve harness pinout before starting your install.

The AccuAir Pressure+ Upgrade allows you to add pressure sensors to your existing AccuAir e+ Connect wireless controller changing it into a Pressure+ system. This upgrade will give you 3 programmable pressure presets so you can air up or down to the perfect height with the touch of a single button.

When using the ePlus app, your smartphone will show a visual display of each corner's PSI so you know what your suspension is doing at all times.

Features:

• 3 programmable pressure presets
• Visual display of each corner's PSI in app
• Automatic calibration

Includes:

• (4) digital pressure sensors
• Pressure sensor harness

If you ended up sitting on your TouchPad controller and it stopped working, chances are you'll need to pick up a new controller harness.

Older e-Level and SwitchSpeed controllers harnesses were prone to breaking at the connector due to the design. The new e-Level+ TouchPads are redesigned and less prone to this issue.