Maintenance
The Air Ride Emergency Kit includes the most common items one would need in the event of a failure that would require roadside repair. <br><br> <strong>Includes:</strong> <ul> <li>(4) Straight PTC Unions</li> <li>(2) Swivel Elbow (1/4" MNPT)</li> <li>(2) Reducer (1/2" MNPT to 1/4" FNPT)</li> <li>(2) Reducer (3/8" MNPT to 1/4" FNPT)</li> <li>(4) PTC Inflation Valve (1/4" and 3/8" Kits <strong>ONLY</strong>)</li> <li>(1) PTC Plug (1/4" and 3/8" Kits <strong>ONLY</strong>)</li> <li>(1) Line Cutter</li> <li>(1) Thread Tape</li> <li>(1) 20ft of air line</li> <li>(1) 40a Relay</li> <li>(2) 30a ATO/ATC Fuse</li> <li>(5) Zip Ties</li> </ul>Air Ride Emergency Kit USD 65.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/replacement-air-management-parts/maintenance/air-ride-emergency-kit.html
One of the easiest ways to drain your tank! As your compressors run, they create condensation which cools and pools up inside of your air tank. The swivel elbow that is included with this kit goes on the bottom most port of your tank that is pointing down, towards the ground. Connect the 5 feet of 1/4" air line to the swivel elbow (trim if needed), and then connect the PTC inflation valve to the other end.
When you are ready to drain your tank, just pull the inflation valve and air line out of your car, depress the pin in the inflation valve and spray water and compressed air out of your tank. Once the water stops flowing you're done! The inflation valve included also doubles as a way to fill your tank in the unlikely event a compressor fails to run.
Includes:- (1) 1/4"PTC - 1/4"NPT SMC DOT Swivel Elbow
- (1) 1/4"PTC Inflation Valve
- Five (5) feet of 1/4" Air Line
A reducer bushing may be required to work with certain tanks.
BR01291 USD 20.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/replacement-air-management-parts/maintenance/air-tank-drain-kit.html
<p>The Electric Air Tank Drain Kit is one of the quickest and easiest ways to drain your air tank. As your compressors run, they create condensation which cools and pools up inside of your tank. Getting rid of this condensation is mandatory to prevent water from entering your valves and the rest of the system. This kit has the same functionality as the <a href="{{store direct_url="air-tank-drain-kit.html"}}" target="_blank">Air Tank Drain Kit</a> but allows you to purge the tank with a single press of a button from inside of the car!</p> <strong>Installation Manual</strong> <ul> <li><a href="{{store direct_url=media/bagriders/tech_section/bag_riders/installation_manuals/bag_riders/management/bag_riders_electric_tank_drain_kit_installation_guide.pdf}}" target="_blank">Electric Tank Drain Kit Installation Manual</a></li> </ul>BR01753 USD 80.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/replacement-air-management-parts/maintenance/electric-air-tank-drain-kit.html
O-Ring Lubricant (1mL)O-Ring Lubricant (1mL) https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/o/-/o-ring-lube.jpg O-Ring Lubricant (1mL) BR05441 USD 3.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/air-management/replacement-air-management-parts/maintenance/o-ring-lubricant-1ml.html$3.00
SquareTank Seal Kit (Black)SquareTank Seal Kit (Black) https://www.bagriders.com/media/catalog/product/placeholder/default/imagecomingsoonfinal_4.png$20.00If you ever need to open up your SquareTank for paint or repair, all of the hardware and o-rings must be replaced. If you don't end up replacing all of your hardware and o-rings after 'breaking the factory seal' you'll most likely have some pretty severe leaks.
Includes:- (2) O-Rings
- (8) Black Hardware
- O-Ring Lube Packet
- Anti Seize Packet
- SquareTank Seal Kit (Clear)SquareTank Seal Kit (Clear) https://www.bagriders.com/media/catalog/product/placeholder/default/imagecomingsoonfinal_4.png$20.00
If you ever need to open up your SquareTank for paint or repair, all of the hardware and o-rings must be replaced. If you don't end up replacing all of your hardware and o-rings after 'breaking the factory seal' you'll most likely have some pretty severe leaks.
Includes:- (2) O-Rings
- (8) Clear Hardware
- O-Ring Lube Packet
- Anti Seize Packet
