RideTech's TruTurn front kit is specifically designed for the 1st Gen Chevrolet Camaro and Pontiac Firebird as well as the 3rd Gen Chevrolet Nova. This kit includes an upgraded steering system with steering arms, a draglink bracket, and tie rod assemblies.
These early cars had very poor suspension geometry where the tires lean outward around turns, the bumpsteer is bad, and there is little room to run a wide wheel because the OEM steering arm interferes with the inside of the wheel.
The TruTurn system resolves all of these issues. The tires now lean into the turn, the bumpsteer is under 0.50" through 5" of suspension travel, and you now have the clearance to run up to a 10" wide wheel with a 275mm tire.
Includes- (2) Steering arms - designed to eliminate bumpsteer and allow clearance for up to a 10" wide wheel with a 5.75" backspacing
- (1) Draglink bracket - bolts on to your OEM draglink to relocate the inner tie rod end to minimize bumpsteer
- (2) Tie rod assemblies - integrates with your we steering arms and center link to provide a true "no fab" bolt-on steering system