Check Valves
Check valves are one way valves that are usually used in conjunction with a compressor to allow air flow into the tank, without it leaking back out through the compressor. They can also be used with manifolds like the AccuAir VU4 which require back pressure in order to keep the valves shut. This allows the tank to be removed for service or drained, while allowing the vehicle to maintain its ride height.
Check Valves Products Browse a collection of Check Valves products en
- Adjustable Aluminum Fitting Wrench https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/f/i/fitting-wrench-2.jpg<p>Tired of always looking for the right size open ended wrench or your adjustable keeps slipping off and marking up your fittings and tank? This aluminum fitting wrench is the perfect solution, especially if you're working on a show-worthy hardline setup. This wrench engages with 5 sides of the fitting for a more secure fit. It's also aluminum, meaning it's softer than the brass and steel fittings you're working with, and should reduce any marring to the fittings.</p>BR26507 USD 30.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/fittings/check-valves/adjustable-fitting-wrench.html
- SMC Check Valve https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/s/m/smc-check-valve-1.jpg Check valves, sometimes referred to as “one way valves” or “non-return valves” are common components found in air management systems. These SMC check valves are generally used on each supply line from the tank to the manifold in order to prevent back-flow from your air springs in the event that your air tank were to depressurize. Great to have for doing maintenance on your tank / management when you want your car to be at a raised height to save your back. SMC Check Valve USD 25.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/fittings/check-valves/smc-check-valve.html
- SMC Compressor Check Valve https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/s/m/smc-compressor-check-valve-1.jpg<p>Is your compressor check valve leaking or seized? This SMC check valve kit is a direct replacement for the standard 1/4" Viair check valves that are located on the end of your compressor leader line. The SMC check valves are more rugged and are a must for those who daily drive in below freezing temperatures.</p> <p>Testing your current compressor check valve for a leak is easy. Starting with a cool, unpowered compressor, remove the filter housing and put your finger over the intake port for 30 seconds to a minute. If you hear or feel air escape when removing your finger from the compressor intake.. you're going to need a new one.</p>BR03300 USD 25.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/fittings/check-valves/smc-compressor-check-valve.html
- SMC PTC Check ValveSMC PTC Check Valve https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/s/m/smc_ptc_check_valve.jpg$18.00Check valves, sometimes referred to as “one way valves” or “non-return valves” are common components found in air management systems. These SMC check valves are generally used on each supply line from the tank to the manifold in order to prevent back-flow from your air springs in the event that your air tank were to depressurize. Great to have for doing maintenance on your tank / management when you want your car to be at a raised height to save your back.SMC PTC Check Valve USD 18.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/fittings/check-valves/smc-ptc-check-valve.html