Elbows

<p>Tired of always looking for the right size open ended wrench or your adjustable keeps slipping off and marking up your fittings and tank? This aluminum fitting wrench is the perfect solution, especially if you're working on a show-worthy hardline setup. This wrench engages with 5 sides of the fitting for a more secure fit. It's also aluminum, meaning it's softer than the brass and steel fittings you're working with, and should reduce any marring to the fittings.</p>

<p>These Camozzi BSPT/NPT Swivel Elbows are a unique fitting that has less threads than your typical NPT or BSPT pipe fitting, and also features a rubber o-ring which allows it to seal well in both NPT and BSPT applications. This creates a fitting that fits more flush, and is dual purpose. The push-to-connect (PTC) end is easy to connect and disconnect, just match to your air line size. <br> <br> While NPT fittings are generally the standard in the US, a lot of Taiwanese manufacturers such as D2 and TruHart use BSPT. Don't know which style threading your air ride has? No problem, as long as you know the size you need. Certain installs might benefit from the <a href="{{store direct_url='camozzi-bspt-npt-male-straight.html'}}" target="_blank">Camozzi BSPT/NPT Male Straight</a> instead.</p>

This composite plug-in elbow is most commonly used to convert a 3/8" PTC manifold down to 1/4" PTC. It can also be installed into other PTC fittings to make a quick 90º turn with your air line.

Manufacturers such as D2 Racing, Truhart, Maxload, or FeelAir tend to use BSPT threaded ports on their products. In this case, the most simple way to connect your air line to your setup with no headaches is to use the Pace BSPT Swivel Elbow fittings.

This plug-in elbow from SMC is most commonly used with manifolds that have PTC ports. It can also be installed in any similar sized PTC fitting to make a quick 90º turn with your air line. If you have 3/8" air line, you will need to go with the <a target="_blank" href="{{store direct_url='/composite-plug-in-elbow.html'}}">Composite Plug-In Elbow</a> instead.

This female swivel elbow from SMC can be used on the male threaded posts of certain gauges like the <a target="_blank" href="{{store direct_url='exta-dual-needle-gauge.html'}}">Exta Dual Needle Gauge</a>. Used for 1/8" air line only.

This SMC swivel elbow can be used to route 1/8" air line to your gauges. If you need a swivel elbow for your 1/4", 3/8", or 1/2" air line, you should pick up the <a target="_blank" href="{{store direct_url='smc-dot-swivel-elbow.html'}}">SMC DOT Swivel Elbow</a> instead.