Mercury Cougar 1st Gen FeelAir BP4 Air Ride Kit

FeelAir BP4

FeelAir BP4 is a pressure based control system packed with functionality. It features 3 pressure based presets, a dedicated all-down button, as well as individual corner and paired front & rear control. It also has rise-on-start and air out-on-shutdown capabilities. It features a super thin, wired controller which will display your 4 corner pressures plus your tank pressure. There is also a free smartphone app for iPhone and Android users to download as well.

Front Suspension

RideTech ShockWave RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design

Stock: Ships from Supplier

Make a Selection

Front Upper Control Arms

These front upper control arms from RideTech feature a cross shaft that lowers the overall pivot point of the arm which in turn increases the camber gain and helps keep the tire flat on the ground through hard corners. What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped oem control arms detract from all that work

Stock: Ships from Supplier

Make a Selection

Front Lower Control Arms

These front lower control arms from RideTech use an eccentric eliminator that had multiple positions that can be used when aligning the car. Once these control arms are set, you don't have to worry about your alignment moving again

Stock: Ships from Supplier

Make a Selection

Rear Suspension

RideTech ShockWave RideTech’s ShockWave air suspension mounts just like a coil over and replaces the coil-spring with an adjustable air spring for a huge range of tuning options. It provides a simple, high tech way to provide the ultimate in adjustable suspension design

Requires the RideTech Bolt-On 4-Link Rear Kit for proper installation.

Stock: Ships from Supplier

Make a Selection

Bolt-On 4-Link Rear (Required)

{Ford Cougar 67} RideTech Bolt-On 4-Link Rear Kit

Stock: Ships from Supplier

Make a Selection

System & Air Line

1/4" air line is what we recommend for most vehicles running FeelAir management. If you're a fan of an extremely fast lift and drop, than 3/8" may be better tailored towards your needs.

Stock: In Stock

Make a Selection

Air Tank

This 4 gallon tank is one of the most popular options, and for good reason. Air tank volume can be personal preference but the 4 gallon tank is the best middle of the road size. Not too big, not too small. The perfect size for starting out.

Stock: In Stock

Make a Selection

Compressor

The Viair 444C compressor is one of the most popular compressors in the air suspension community. The 444C is a great mid-range compressor and one of the best bangs for your buck. Not too loud, not too slow, and rated for 200 PSI.

Stock: In Stock

Make a Selection

Compressor Power Kit

None for me, thanks!

Stock: Make a Selection

Make a Selection

Water Trap

None for me, thanks!

Stock: Make a Selection

Make a Selection

Upgraded Compressor Check Valve

None for me, thanks!

Stock: Make a Selection

Make a Selection

Compressor Silencer

None for me, thanks!

Stock: Make a Selection

Make a Selection

Free Shirt

None for me, thanks!

Stock: Make a Selection

Make a Selection

FeelAir's BP4 Air Management is a pressure based control system that features 3 user-programmable presets and a dedicated all-down button. The use of the up and down buttons, paired with the front and rear buttons on the controller, allows the system both individual, 4-corner control as well as paired front and rear control. The wired controller is slimmer than competitive offerings and offers a backlit screen which displays four bag pressures as well as tank pressure and is also capable of smartphone control via bluetooth.

Features:

(3) User-definable pressure presets
Dedicated All-Down button
Rise-on-start and air out-on-shutdown functionality
Manual mode for individual and paired air spring control
Super thin, digital controller with backlit screen
Mobile app (no additional hardware required)
Combined ECU and manifold
1 year limited warranty

FeelAir BP4 Management Includes:

FeelAir BP4 System

Combined ECU/Manifold Unit
ECU/Manifold Mounting Hardware
FeelAir BP4 Controller and Harness
FeelAir Vent Mount Controller Holder
Pre-assembled ECU/Manifold Wiring Harness
Compressor wiring harness with pre-wired relay
In-line Fuse Holders (with fuses)
Wiring Terminals for hassle-free Installation
Manifold fitting pack

Aluminum Air Tank of your choice
Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
Compressor(s) of your choice
Air Tank Drain Kit
Air Line Cutter Tool
(1) 60ft Bundle of DOT Approved Air Line
100% Free Technical Support - The Industry's Best!

Power Kit Options:

Single Compressor kits do not require a power kit; it is included with the FeelAir BP4 System
FeelAir BP4 Second Compressor Harness

Mercury Cougar 1st Gen (1967-1970) RWD

FEELAIR BP4 VS AIR LIFT 3P

The FeelAir BP4 control system might be less expensive than Air Lift's popular 3P, but that doesn't mean it's necessarily lacking. Check out our comparison video where we do a deep dive, comparing the FeelAir BP4 to the Air Lift 3P. We cover the overall look and feel of the two controllers, touch on a couple of important features, and go over the preset accuracy between the two systems. Regardless of what you end up choosing, the FeelAir BP4 and the Air Lift 3P are two of the best pressure based air ride control systems on the market today. Here at Bag Riders, these are the two most popular control systems you'll find in our personal cars.

What you need to know about the FeelAir BP4 Air Ride Kit

FeelAir BP4 is a pressure based control system packed with functionality. It features 3 pressure based presets, a dedicated all-down button, as well as individual corner and paired front & rear control. It also has rise-on-start and air out-on-shutdown capabilities. It features a super thin, wired controller which will display your 4 corner pressures plus your tank pressure. There is also a free smartphone app for iPhone and Android users to download as well.

How to install Air Ride - Where do I start?

If you are looking to purchase an air ride kit for your vehicle, you might be wondering how to start installing you shiny new parts on your car once you recieve them. In this video, we will show you the steps that we take when installing air suspension on our own cars so that you can get an idea on how to tackle your air suspension install efficiently and correctly!

What comes in your air ride kit?

When you purchase a FeelAir BP4 air ride kit from Bag Riders, it comes with everything you need to install it without confusion and unwanted trips to the hardware store. Our custom air ride kits are built for you based on the selections you make. Included with your air ride kit are two main parts. The suspension, and the air management system which contains the controller, air compressor, air tank, fittings, power kit, and air lines. Rest assured that when you buy a FeelAir BP4 Air Ride Kit from Bag Riders, you'll be getting everything you need to get your car driving on air suspension. Check out the video for a more detailed rundown of what exactly is included in our custom built air ride kits.

Customer Reviews

5 Star

(3)

4 Star

(1)

3 Star

(0)

2 Star

(0)

1 Star

(0)

Write Your Own Review

Mercury Cougar 1967-1970 FeelAir BP4 Air Ride Kit

Thank You!

Selections

Details

Applications

Videos

Reviews (4)








Tell us about your Vehicle: