These front lower control arms from RideTech use an eccentric eliminator that had multiple positions that can be used when aligning the car. Once these control arms are set, you don't have to worry about your alignment moving again. Any fine tuning that is needed can be done with the fully adjustable upper control arms.
What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped oem control arms detract from all that work. Finish your suspension off with these new tubular control arm systems from Ridetech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave® installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these.
Development
StrongArms are developed by Ridetech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.
What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped oem control arms detract from all that work. Finish your suspension off with these new tubular control arm systems from Ridetech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave® installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these.
Development
StrongArms are developed by Ridetech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.
- RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should!
- The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement.
- The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
- All shock mounts, airspring mounts, and swaybar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride!