Chevrolet Tahoe 1st Gen RWD
1995-2000
Here you'll find a full range of air suspension parts that are specifically designed to fit your Chevrolet Tahoe 1st Gen (1995-2000). From all-in-one complete air ride kits that have everything you need to bag your Chevrolet Tahoe, to individual parts and pieces like control arms and camber plates. Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to bag your Chevrolet Tahoe 1st Gen (1995-2000) on a budget.
- Air Suspension
RideTech CoolRide Front KitRideTech CoolRide Front Kit https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/r/i/ridetech_coolride_w_shocks_16.jpg This is where "Air Ride Technology" begins and is still a valuable solution for many applications. RideTech's CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride. {GM T400, GM T420} RideTech CoolRide Front Kit Ridetech USD 975.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gm-t400-t420-c1500-4th-gen-ridetech-coolride-front-kit.html$975.00
- Control Arms
RideTech Front Spindle PairRideTech Front Spindle Pair https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1_1_1_1_1.jpg$315.00The RideTech spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle.
RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms.
BR06519 Ridetech USD 315.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gm-t400-t420-chevrolet-c1500-4th-gen-ridetech-front-spindle-pair.html
Development
StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.- RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should!
- The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement.
- The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
- All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride!
Development
StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.- RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should!
- The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement.
- The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
- All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride!
- Air Suspension Parts
- RideTech Front Spindle PairRideTech Front Spindle Pair https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/r/i/ridetech_front_spindle_pair_chevelle_camaro_gto_firebird_1_1_1_1_1.jpg$315.00
The RideTech spindle is a heavy duty forging that is approx. 1.75" taller (balljoint to balljoint) than the OEM spindle. This basic geometry change increases the camber gain during suspension compression which allows the tire to lean into the turn instead of away from the turn. The RideTech spindle also has a pin height that is 2" higher than the OEM spindle. This means that your car will sit 2" lower than it would with the OEM spindle.
RideTech has used this spindle on their own track cars with great success over the last 4 years. They have used both Wilwood and Baer brake kits designed for the GM A body with this spindle. The RideTech spindle is requires aftermarket tubular control arms like the RideTech StrongArms Front Upper Control Arms and the StrongArms Front Lower Control Arms.
BR06519 Ridetech USD 315.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/gm-t400-t420-chevrolet-c1500-4th-gen-ridetech-front-spindle-pair.html
Air Ride Suspension for your Chevrolet Tahoe 1st Gen (1995-2000)
It's time to bag your Chevrolet Tahoe 1st Gen (1995-2000). Bag Riders offers a full range of air suspension parts and pieces that are specifically designed to fit your Chevrolet Tahoe. From complete air ride kits that have everything you need from the air management to the air suspension itself, to parts like control arms and camber plates - Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to get your Chevrolet Tahoe set up with air suspension on a budget.
Air ride suspension doesn't need to be complicated and that's where Bag Riders comes in. Our huge selection of air ride products, our unbeatable customer service, and our built in house complete air ride kits and management packages mean you can get that custom air ride kit of your dreams with ease. Bag Riders is here to make sure you have the best air ride experience possible. Not sure where to start? Reach out, ask us all the questions, and let us help you get your Chevrolet Tahoe 1st Gen (1995-2000) on air suspension.