Ford Mustang 2nd Gen RWD
1974-1978
Here you'll find a full range of air suspension parts that are specifically designed to fit your Ford Mustang 2nd Gen (1974-1978). From all-in-one complete air ride kits that have everything you need to bag your Ford Mustang, to individual parts and pieces like control arms and camber plates. Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to bag your Ford Mustang 2nd Gen (1974-1978) on a budget.
- Air Suspension
- RideTech CoolRide Front KitRideTech CoolRide Front Kit https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/r/i/ridetech_coolride_19010910.jpg This is where "Air Ride Technology" begins and is still a valuable solution for many applications. RideTech's CoolRide system replaces the traditional coil-spring and shock with an air spring and shock as separate units. CoolRide systems are engineered to perform and come with all hardware and brackets. The CoolRide system will raise and lower the vehicle, improving the handling and offering a terrific ride. {Ford Mustang II} RideTech CoolRide Front Kit Ridetech USD 875.00 https://schema.org/NewCondition https://schema.org/InStock https://www.bagriders.com/ford-mustang-ii-ridetech-coolride-front-kit.html$875.00
- Control Arms
- RideTech StrongArms Front Upper Control Arms https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/r/i/ridetech_strongarms_19013699.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these.
Development
StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.- RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should!
- The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement.
- The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
- All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride!
- RideTech StrongArms Front Lower Control Arms (For CoolRide) https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/r/i/ridetech_strongarms_19011499.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these.
Development
StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.- RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should!
- The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement.
- The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
- All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride!
- RideTech StrongArms Front Lower Control Arms (For Shockwave) https://www.bagriders.com/media/catalog/product/cache/6cc469ce9f0c45ca88dc49d6594bbebe/r/i/ridetech_strongarms_19012899.jpg What says “performance” more than a set of tubular control arms! After all of the time and effort expended on your ride, you definitely can’t let your stamped OEM control arms detract from all that work. Finish your suspension off with these tubular control arm systems from RideTech. Built with all of the care and experience you have come to expect from us, these tubular control arms are a precision engineered solution for ShockWave installation, ball joint binding, and frame clearance issues that can haunt some vehicles. When you combine the performance benefits with the elegant design of these arms, there is no question.... You want these.
Development
StrongArms are developed by RideTech in Jasper, Indiana on an actual running, driving vehicle. This allows them to properly address ALL fitment and performance issues. It also allows them to document an installation, demonstrate the installation to their sales techs and dealers, and allows ongoing evaluation of the performance of the StrongArms.
Design
RideTech’s Strong Arms are designed with as few components as possible. Their 4 axis tubing bender allows precise, repeatable bends that no other machine can achieve. They can create elegant tubing bends that would otherwise require several separate welded components.
Geometry
Geometry of a suspension starts with the position of the frame mounts and the height of the spindle, not the shape of the control arm. However, there are a few small things in control arm design that can make a big difference in how a vehicle drives and performs.- RideTech creates extra caster potential by adjusting the fore and aft position of the ball joints. At the same time they make sure the wheel is properly positioned in the wheel-well so your new 18" wheels fit like they should!
- The balljoint camber travel is re-centered to accommodate the new lowered ride height so the ball joint doesn’t bind during extreme suspension movement.
- The perimeter of the StrongArms is contoured to allow maximum wheel clearance and turning radius.
- All shock mounts, air spring mounts, and sway bar mounts are integrated into the design so you don’t have to finish the engineering in order to enjoy your ride!
Air Ride Suspension for your Ford Mustang 2nd Gen (1974-1978)
It's time to bag your Ford Mustang 2nd Gen (1974-1978). Bag Riders offers a full range of air suspension parts and pieces that are specifically designed to fit your Ford Mustang. From complete air ride kits that have everything you need from the air management to the air suspension itself, to parts like control arms and camber plates - Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to get your Ford Mustang set up with air suspension on a budget.
Air ride suspension doesn't need to be complicated and that's where Bag Riders comes in. Our huge selection of air ride products, our unbeatable customer service, and our built in house complete air ride kits and management packages mean you can get that custom air ride kit of your dreams with ease. Bag Riders is here to make sure you have the best air ride experience possible. Not sure where to start? Reach out, ask us all the questions, and let us help you get your Ford Mustang 2nd Gen (1974-1978) on air suspension.