Toyota Highlander 1st Gen AWD
2001-2007
Here you'll find a full range of air suspension parts that are specifically designed to fit your Toyota Highlander 1st Gen (2001-2007). From all-in-one complete air ride kits that have everything you need to bag your Toyota Highlander, to individual parts and pieces like control arms and camber plates. Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to bag your Toyota Highlander 1st Gen (2001-2007) on a budget.
- Air Ride Kits
The Bag Riders Manual Air Management is one of the most reliable air management options for your car due to its simple design and lack of electrical or digital components. The heart and namesake of the system are the Manual Paddle Valves which function as both the controller and valve block (manifold). Each paddle provides two-way control of a single air spring: press up on the paddle to inflate and press down to deflate, simple as that! The Manual Air Management is the perfect solution for any budget air ride build, or for the newcomer who doesn’t want to break the bank on their first setup.
Bag Riders Manual Management Includes:- (4) Manual Paddle Valves with Mounting Plate
- Aluminum Air Tank of your choice
- FREE Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
- Compressor(s) of your choice
- 40A Relay(s) for your compressor(s)
- Relay Wiring Kit(s)
- Inflation Valve
- 110-145 PSI Pressure Switch
- Tank Drain Kit
- Air Line Cutter Tool
- (1) 60ft Bundle of DOT Approved 1/4' Air Line
- (2) PTC Union Y Fittings
- 100% Free Technical Support - The Industry's Best!
FeelAir's BP4 Air Management is a pressure based control system that features 3 user-programmable presets and a dedicated all-down button. The use of the up and down buttons, paired with the front and rear buttons on the controller, allows the system both individual, 4-corner control as well as paired front and rear control. The wired controller is slimmer than competitive offerings and offers a backlit screen which displays four bag pressures as well as tank pressure and is also capable of smartphone control via bluetooth.
Features:
- (3) User-definable pressure presets
- Dedicated All-Down button
- Rise-on-start and air out-on-shutdown functionality
- Manual mode for individual and paired air spring control
- Super thin, digital controller with backlit screen
- Mobile app (no additional hardware required)
- Combined ECU and manifold
- 1 year limited warranty
- FeelAir BP4 System
- Combined ECU/Manifold Unit
- ECU/Manifold Mounting Hardware
- FeelAir BP4 Controller and Harness
- FeelAir Vent Mount Controller Holder
- Pre-assembled ECU/Manifold Wiring Harness
- Compressor wiring harness with pre-wired relay
- In-line Fuse Holders (with fuses)
- Wiring Terminals for hassle-free Installation
- Manifold fitting pack
- Aluminum Air Tank of your choice
- Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
- Compressor(s) of your choice
- Air Tank Drain Kit
- Air Line Cutter Tool
- (1) 60ft Bundle of DOT Approved Air Line
- 100% Free Technical Support - The Industry's Best!
- Single Compressor kits do not require a power kit; it is included with the FeelAir BP4 System
- FeelAir BP4 Second Compressor Harness
The e+ Connect Air Management Package is AccuAir's entry level management system that starts out as a simple smartphone based wireless switch box that can be upgraded over time to a full fledged e-Level system. By adding the e-Level+ Height Sensor Upgrade and even a physical e-Level+ TouchPad Controller, you can build your way up to one of the most premiere managements on the market.
If you're looking for the maxed out version of this system with all of the features, be sure to check out the AccuAir e-Level+ Air Management Package.
- Control your air suspension with your smartphone using the e-Level Plus app
- Air tank pressure readout on the e-level Plus app
- RGB backlighting that allows you to change the color of your ECU
- Included wiring harness for direct plug-n-play with the ENDO-CT and ENDO-CVT air tank systems
- Battery saver mode that puts the system to sleep after 24 hours
- Bluetooth 5.0
- Over the air updates
Includes:- AccuAir e+ Connect ECU
- Wiring harness
- Digital Pressure Sensor
- e-Level Plus smartphone app
- Aluminum air tank of your choice
- Compressor(s) of your choice
- 40amp Relay(s) for your compressor(s)
- Relay wiring kit(s)
- Inflation Valve
- Air Tank Drain Kit
- Air Line Cutter Tool
- (1) 60ft Bundle of DOT Approved Air Line**
- 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers
The 3P from Air Lift Performance is a pressure based management that features 5 user-programmable pressure presets and individual, four corner, air spring control. The 3P’s wired digital controller displays all four bag pressures as well as the tank pressure. The controller uses a full color, backlit screen and features a rotatable keypad that allows for horizontal controller mounting.
Air Lift’s mobile app allows the vehicle to be put into a ‘show mode’ which enables you to remotely control the air suspension using your Bluetooth enabled smart phone (iPhone/Android) from a distance once the vehicle has been turned off. No additional hardware is required to use this feature, it is built into every 3P and 3H system! Future system updates can be applied through the app as well.
If you're looking for a system that takes both pressure and height into consideration, you should look into purchasing the Air Lift Performance 3H Air Management Package. If you'd rather get the 3P to start, you can always upgrade to the 3H at a later date by purchasing Air Lift's 3P to 3H Upgrade Kit.
Features:
- (5) User-definable pressure presets (can be upgraded to height)
- Manual mode for individual air spring control
- Digital controller with color screen
- Rotatable keypad that allows for horizontal mounting
- Mobile app (no additional hardware required)
- System updates through mobile app
- Combined ECU and manifold
- Rise on start
- 2 year limited warranty, extendable up to 4 with the purchase of Air Lift brand suspension; details here
Air Lift Performance 3P Management Includes:- Air Lift Performance 3P System
- Combined ECU/Manifold Unit
- ECU/Manifold Mounting Hardware
- Air Lift Performance 3P/3P Controller and Harness
- Pre-assembled ECU/Manifold Wiring Harness with built-in Compressor Relay
- SMC water trap
- In-line Fuse Holders (with fuses)
- Wiring Terminals for hassle-free Installation
- Aluminum Air Tank of your choice
- Free Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
- Compressor(s) of your choice
- 40amp Relay(s) for your compressor(s)**
- Relay Wiring Kit(s)**
- Air Tank Drain Kit
- Air Line Cutter Tool
- (1) 60ft Bundle of DOT Approved Air Line
- 100% Free Technical Support - The Industry's Best! ** Single Compressor kits will not include an additional relay, as a relay is built into the Air Lift Performance 3P Wiring Harness
The 3H from Air Lift Performance is both a height and pressure based management that features 5 preset heights and individual four corner air spring control. The height based sensors give the system the ability to automatically and accurately re-level when loads change (e.g., adding a passenger or traveling with luggage).
Installing height sensors is often a daunting task for the weekend mechanic, but worry not because Air Lift has designed the 3H so that it can operate in "pressure-only mode" in the event that you don't have time to get the sensors installed right away.. Or you just can't wait to test out your new suspension!
The 3H’s wired digital controller displays all four bag pressures as well as the tank pressure. The controller uses a full color, backlit screen and features a rotatable keypad which allows for either vertical or horizontal controller mounting.
Air Lift’s mobile app allows the vehicle to be put into a ‘show mode’ which enables you to remotely control the air suspension using your Bluetooth enabled smart phone (iPhone/Android) from a distance once the vehicle has been turned off. No additional hardware is required to use this feature, it is built into every 3P and 3H system! Future system updates can be applied through the app as well.
Air Lift’s digital management system utilizes a combined ECU and manifold which greatly simplifies the installation process. The included plug-n-play wiring harness will power a single compressor and if you’re planning on running dual compressors, you'll need to pick up the Air Lift 3H / 3P Second Compressor Harness.
Features:
- (5) height and pressure presets
- Automatic leveling (with height sensors installed)
- Manual mode for individual air spring control
- Digital controller with color screen
- Rotatable keypad that allows for horizontal mounting
- Mobile app (no additional hardware required)
- System updates through mobile app
- Combined ECU and manifold
- Rise on start
- 2 year limited warranty, extendable up to 4 with the purchase of Air Lift brand suspension; details here
Air Lift Performance 3H Management Includes:- Air Lift Performance 3H System
- Combined ECU/Manifold Unit
- (4) Air Lift Performance Height Sensors and Mounting Hardware
- ECU/Manifold Mounting Hardware
- Air Lift Performance 3H/3P Controller and Harness
- Pre-assembled ECU/Manifold Wiring Harness with built-in Compressor Relay
- SMC water trap
- In-line Fuse Holders (with fuses)
- Wiring Terminals for hassle-free Installation
- Aluminum Air Tank of your choice
- Free Air Tank Fitting Pack (only compatible with tank options in the full kit drop down menu)
- Compressor(s) of your choice
- 40amp Relay(s) for your compressor(s)**
- Relay Wiring Kit(s)**
- Air Tank Drain Kit
- Air Line Cutter Tool
- (1) 60ft Bundle of DOT Approved Air Line
- 100% Free Technical Support - The Industry's Best! ** Single Compressor kits will not include an additional relay, as a relay is built into the Air Lift Performance 3H Wiring Harness
The e-Level+ from AccuAir is a height based management that features 3 programmable height presets with the added ability of individual, four corner, air spring control. AccuAir's eLevel+ system allows you to control your vehicle's suspension with a physical controller or through your smartphone with the e-Level Plus app. Direct plug-n-play with the ENDO-CT and ENDO-CVT air tank systems allow for one of the cleanest management setups on the market.
If you're looking for a more simple approach without all of the bells and whistles, be sure to check out the AccuAir e+ Connect Air Management Package.
- 3 programmable heights
- Visual display of each sensor's height percentage
- Automatic calibration
- Air tank pressure readout on the e-Level Plus smartphone app
- RGB backlighting that allows you to change the color of your ECU
- Included wiring harness for direct plug-n-play with the ENDO-CT and ENDO-CVT air tank systems
- Bluetooth 5.0
- Control your air suspension with your smartphone using the e-Level Plus app
- Compressor status indicator light
- Over the air updates
- Battery saver mode that sleeps the system after 24 hours
AccuAir e-Level+ Air Management Package Includes:- AccuAir e-Level+ System
- e-Level+ ECU
- (4) height sensors
- e-Level+ TouchPad controller (optional)
- ECU main harness
- ECU valve harness
- e-Level+ height sensor harness
- Digital pressure sensor
- Aluminum air tank of your choice
- Compressor(s) of your choice
- 40amp Relay(s) for your compressor(s)
- Relay wiring kit(s)
- Inflation Valve
- Air Tank Drain Kit
- Air Line Cutter Tool
- (1) 60ft Bundle of DOT Approved Air Line**
- 100% FREE technical support - the industry's best! **By choosing 1/4" air line you will receive (6) Plug-In Reducers
- Air Suspension
The Solution Series from Universal Air is a vehicle specific complete air spring and strut package that increases comfort, boosts performance, and fits perfectly. Universal Air's Solution Series solves the issue of aftermarket suspensions being too fat or too tall for an application. Air House 2 bags on fully threaded dampers provides you with the ultimate travel range, ride quality, and clearance.
Features:- Air House 2 bags that allow for extremely low compressed height and extended travel, while still maintaining clearance from tires and other suspension components
- Proprietary threaded dampers - stiff enough to maintain high performance levels, and relaxed enough to provide an enjoyable ride
- Completely bolt in - easy install without any advanced modification to your vehicle
- Upper strut mounts machined from 6061-T6 aluminum with spherical bearings for articulation and rubber isolation for added comfort.
- Sealed rotary thrust bearings, designed to keep dirt and moisture out of the assembly
- 6061-T6 aluminum and hard anodized bag end caps for ultimate durability
Includes:- Universal Air Solution Series front suspension
- Universal Air Solution Series rear suspension
- Spanner tool
- Fittings
Air Ride Suspension for your Toyota Highlander 1st Gen (2001-2007)
It's time to bag your Toyota Highlander 1st Gen (2001-2007). Bag Riders offers a full range of air suspension parts and pieces that are specifically designed to fit your Toyota Highlander. From complete air ride kits that have everything you need from the air management to the air suspension itself, to parts like control arms and camber plates - Bag Riders has it all. We even carry multiple lines of coilovers and coilover conversion bags if you're looking to get your Toyota Highlander set up with air suspension on a budget.
Air ride suspension doesn't need to be complicated and that's where Bag Riders comes in. Our huge selection of air ride products, our unbeatable customer service, and our built in house complete air ride kits and management packages mean you can get that custom air ride kit of your dreams with ease. Bag Riders is here to make sure you have the best air ride experience possible. Not sure where to start? Reach out, ask us all the questions, and let us help you get your Toyota Highlander 1st Gen (2001-2007) on air suspension.